Top 10 .30-06 Springfield related articles
- 1 History
- 2 Firearms
- 3 Performance
- 4 Recoil
- 5 Cartridge dimensions
- 6 Military cartridge types
- 7 U.S. military firearms using the .30-06 cartridge
- 8 See also
- 9 References
- 10 External links
.30-06 Springfield cartridge with soft tip
|Place of origin||United States|
|Used by||USA and others|
|Wars||World War I, World War II, Korean War, Vietnam War, to present|
|Designer||United States Military|
|Parent case||.30-03 Springfield|
|Case type||Rimless, bottleneck|
|Bullet diameter||.308 in (7.8 mm)|
|Neck diameter||.340 in (8.6 mm)|
|Shoulder diameter||.441 in (11.2 mm)|
|Base diameter||.471 in (12.0 mm)|
|Rim diameter||.473 in (12.0 mm)|
|Rim thickness||.049 in (1.2 mm)|
|Case length||2.484 in (63.1 mm)|
|Overall length||3.34 in (85 mm)|
|Case capacity||68 gr H2O (4.4 cm3)|
|Rifling twist||1-10" (254 mm)|
|Primer type||Large Rifle|
|Maximum pressure (C.I.P.)||58,740 psi (405.0 MPa)|
|Maximum pressure (SAAMI)||60,190 psi (415.0 MPa)|
|Maximum CUP||50,000 CUP|
|Test barrel length: 24 inch (61 cm)|
Source(s): Federal Cartridge / Accurate Powder
The .30-06 Springfield cartridge (pronounced "thirty-aught-six" IPA: [ˈθɝɾi ɔt sɪks]), 7.62×63mm in metric notation and called ".30 Gov't '06" by Winchester, was introduced to the United States Army in 1906 and later standardized; it remained in use until the late-1970s. The ".30" refers to the caliber of the bullet in inches. The "06" refers to the year the cartridge was adopted, 1906. It replaced the .30-03, 6mm Lee Navy, and .30-40 Krag cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the 7.62×51mm NATO and 5.56×45mm NATO, both of which remain in current U.S. and NATO service. It remains a very popular sporting round, with ammunition produced by all major manufacturers.
.30-06 Springfield Intro articles: 1
In the early-1890s, the U.S. military adopted the smokeless powder .30-40 Krag rimmed cartridge. The 1894 version of that cartridge used a 220-grain (14 g) round-nose bullet. Around 1901, the U.S. started developing an experimental rimless cartridge for a Mauser action with box magazine. That led to the 1903 .30-03 rimless service round that used the same 220-grain (14 g) round-nose bullet as the Krag. The .30-03 achieved a muzzle velocity of 2,300 ft/s (700 m/s).
Many European militaries at the beginning of the 20th century were adopting lighter-weight (roughly 150-to-200-grain (9.7 to 13.0 g)), higher velocity, service rounds with pointed (spitzer) bullets: France in 1898 (8mm Lebel Balle D spitzer 198 grains (12.8 g) with boat-tail), Germany in 1903 (7.92×57mm Mauser 153 grains (9.9 g) S Patrone), Russia in 1908 (7.62×54mmR Lyokhkaya pulya [light bullet]), and Britain in 1910 (.303 British Mark VII 174 grains (11.3 g)). Consequently, the round-nosed U.S. .30-03 service cartridge was falling behind.
Cartridge, ball, caliber .30, Model of 1906 (M1906)
For these reasons, the U.S. military developed a new, lighter cartridge in 1906, the .30-06 Springfield, "cartridge, ball, caliber .30, Model of 1906", or just M1906. The .30-03 case was modified to have a slightly shorter neck to fire a spitzer flat-based 150-grain (9.72 g) bullet that had a ballistic coefficient (G1 BC) of approximately 0.405, a muzzle velocity of 2,700 ft/s (820 m/s), and a muzzle energy of 2,429 ft⋅lbf (3,293 J). The cartridge was loaded with military rifle (MR) 21 propellant, and its maximum range was claimed (falsely) to be 4,700 yd (4,300 m). The M1903 Springfield rifle, which had been introduced alongside the .30-03 cartridge, was modified to accept the new .30-06 Springfield cartridge. Modifications to the rifle included shortening the barrel at its breech and resizing the chamber, so that the more tapered bullet would not have to jump too far to reach the rifling. Other changes to the rifle included elimination of the troublesome "rod bayonet" of the earlier Springfield rifles.
The M1906 maximum range was originally overstated. When the M1906 cartridge was developed, the range tests had been done to only 1,800 yards (1,650 m); distances beyond that were estimated, but the estimate for extreme range was wrong by almost 40 percent. The range discrepancy became evident during World War I. Before the widespread employment of light mortars and artillery, long-range machine gun "barrage" or indirect fires were considered important in U.S. infantry tactics. When the U.S. entered World War I, it did not have many machine guns, so it acquired British and French machine guns. When those weapons were later replaced with U.S. machine guns firing the M1906 round, the effective range of the barrage was 50 percent less. Firing tests performed around 1918 at Borden Brook Reservoir (Massachusetts), Miami, and Daytona Beach showed the actual maximum range of the M1906 cartridge to be 3,300 to 3,400 yards (3,020 to 3,110 m). Germany, which was using the S Patrone (S ball cartridge) loaded with a similar 153-grain (9.9 g) flat-based bullet in its rifles, had apparently confronted and solved the same problem by developing an aerodynamically more refined bullet for long range machine gun use. The s.S. Patrone was introduced in 1914 and used a 197.5-grain (12.80 g) s.S. – schweres Spitzgeschoß (heavy spitzer) boat-tail bullet which had a maximum range of approximately 4,700 m (5,140 yd).
.30 M1 Ball cartridge
For these reasons, in 1926, the ordnance corps, after extensive testing of 7.5×55mm Swiss GP11 projectiles provided by the Swiss developed the .30 M1 Ball cartridge loaded with a new improved military rifle (IMR) 1185 propellant and 174-grain (11.28 g) bullet with a 9° boat-tail and an ogive of 7 calibers nose cone that had a higher ballistic coefficient of roughly 0.494 (G1 BC), that achieved a muzzle velocity of 2,647 ft/s (807 m/s) and muzzle energy of 2,675 ft⋅lbf (3,627 J). This bullet further reduced air resistance in flight, resulting in less rapid downrange deceleration, less lateral drift caused by crosswinds, and significantly greater supersonic and maximum effective range from machine guns and rifles alike. Additionally, a gilding metal jacket was developed that all but eliminated the metal fouling that plagued the earlier M1906 cartridge. The round weighed 420 grains (27 g) and its maximum range was approximately 5,500 yd (5,030 m). The Maximum Average Pressure (MAP) was 48,000 psi (330.95 MPa). The average target radii at 500 yd (457 m) shall be not greater than 4.5 in (11 cm) and at 600 yd (549 m) shall be not greater than 5.5 in (14 cm) when fired from a Mann accuracy weapon.
Cartridge, caliber .30, ball, M2
Wartime surplus totaled over 2 billion rounds of ammunition. Army regulations called for training use of the oldest ammunition first. As a result, the older .30-06 ammunition was expended for training; stocks of .30 M1 ball ammunition were allowed to slowly grow until all of the older M1906 ammunition had been fired. By 1936, it was discovered that the maximum range of the .30 M1 ball ammunition with its boat-tailed spitzer bullets was beyond the safety limitations of many military firing ranges. An emergency order was made to manufacture quantities of ammunition that matched the external ballistics of the earlier M1906 cartridge as soon as possible. A new cartridge was developed in 1938 that was essentially a duplicate of the old M1906 round, but loaded with IMR 4895 propellant and a new flat-based bullet that had a gilding metal jacket and a different lead alloy, and weighed 152 grains (9.85 g) instead of 150 grains (9.72 g). This 1938 pattern cartridge, the cartridge, caliber .30, ball, M2, achieved a muzzle velocity of 2,805 ft/s (855 m/s) and muzzle energy of 2,656 ft⋅lbf (3,601 J). The round weighed 416 grains (27.0 g) and its maximum range was approximately 3,450 yd (3,150 m). The Maximum Average Pressure (MAP) was 50,000 psi (344.74 MPa). The average target radii at 500 yd (457 m) shall be not greater than 6.5 in (16.5 cm) and at 600 yd (549 m) shall be not greater than 7.5 in (19.1 cm).
.30-06 Springfield History articles: 16
In military service, the .30-06 was used in the bolt-action M1903 Springfield rifle, the bolt-action M1917 Enfield rifle, the semi-automatic M1 Garand rifle, the semi-automatic M1941 Johnson rifle, the Famage Mauser, the Browning Automatic Rifle (BAR), and numerous machine guns, including the M1917 and M1919 series. It served the United States in both World Wars and in the Korean war, its last major use was during the Vietnam war.
The Belgian army (ABL) bought the FN Model 1949 rifle in .30-06 calibre (both as a sniper version with telescopic sights and as a general service weapon). The Belgium armed forces used the round widely in the Korean war, where the .30-06 calibre FN-49 proved to be a superior weapon in terms of both accuracy and reliability to the American M1 Garand. The .30-06 FN-49 saw widespread use in the various wars in and around the Belgian Congo. The 30-06 FN-49 was also sold to the armies of Luxembourg, Indonesia and Colombia. Another customer was Brazil where it served the Navy.
Large volumes of surplus brass made it the basis for dozens of commercial and wildcat cartridges, as well as being extensively used for reloading. In 1908 the Model 1895 Winchester lever-action rifle became the first commercially produced sporting rifle chambered in .30-06 Springfield. It is still a very common round for hunting and is suitable for large game such as bison, Sambar deer, and bear, when used at close to medium ranges.
In 1903, the Army converted its M1900 Gatling guns in .30 Army to fit the new .30-03 cartridge as the M1903. The later M1903-'06 was an M1903 converted to .30-06. This conversion was principally carried out at the Army's Springfield Armory arsenal repair shops. All models of Gatling guns were declared obsolete by the U.S. Army in 1911, after 45 years of service.
Ballistically, the .30-06 is one of the most versatile cartridges ever designed. With "hot" handloads and a rifle capable of handling them, the .30-06 is capable of performance rivaling many "magnum" cartridges. On the other hand, when loaded more closely to the original government spec, .30-06 remains within the upper limit of felt recoil most shooters consider 'tolerable' over multiple rounds, unlike the magnums, and is not unnecessarily destructive of meat on game such as deer. With appropriate loads, it is suitable for any small or large heavy game found in North America. The .30-06's power and versatility (combined with the availability of surplus firearms chambered for it and demand for commercial ammunition) have kept the round as one of the most popular for hunting in North America.
.30-06 Springfield Firearms articles: 31
The .30-06 cartridge was designed when shots of 1,000 yards (914.4 m) were expected. In 1906, the original M1906 .30-06 cartridge consisted of a 150 grains (9.7 g), flat-base cupronickel-jacketed-bullet. After World War I, the U.S. military needed better long-range performance machine guns. Based on weapons performance reports from Europe, a streamlined, 173 grains (11.2 g) boattail, gilding-metal bullet was used. The .30-06 cartridge, with the 173 grains (11.2 g) bullet was called Cartridge, .30, M1 Ball. The .30-06 cartridge was far more powerful than the smaller Japanese 6.5×50mm Arisaka cartridge and comparable to the Japanese 7.7×58mm Arisaka. The new M1 ammunition proved to be significantly more accurate than the M1906 round.
In 1938, the unstained, 150 grains (9.7 g), flat-base bullet combined with the .30-06 case became the M2 ball cartridge. The M2 Ball specifications required 2,740 feet per second (835.2 m/s) minimum velocity, measured 78 feet (24 m) from the muzzle. M2 Ball was the standard-issue ammunition for military rifles and machine guns until it was replaced by the 7.62×51mm NATO round in 1954. For rifle use, M2 Ball ammunition proved to be less accurate than the earlier M1 cartridge; even with match rifles, a target group of 5 inches (130 mm) diameter at 200 yards (180 m) using the 150-grain (9.7 g) M2 bullet was considered optimal, and many rifles did not perform nearly as well. The U.S. Marine Corps retained stocks of M1 ammunition for use by snipers and trained marksmen throughout the Solomon Islands campaign in the early years of the war.
In an effort to increase accuracy some snipers resorted to use of the heavier .30-06 M2 armor-piercing round, a practice that re-emerged during the Korean War. Others sought out lots of M2 ammunition produced by Denver Ordnance, which had proved to be more accurate than those produced by other wartime ammunition plants when used for sniping at long range. With regards to penetration, the M2 AP round can penetrate at least 0.42 in (10.67 mm) of armor steel at 100 yards (91 m). A test done by Brass Fetchers shows that M2 AP can actually penetrate up to 0.5 in (12.70 mm) of MIL-A-12560 armor steel from a distance of 100 yards (91 m). The round struck the plate at a velocity of 2601 fps, and made a complete penetration.
Commercially manufactured rifles chambered in .30-06 are popular for hunting. Current .30-06 factory ammunition varies in bullet weight from 7.1 to 14.3 grams (109.6 to 220.7 gr) in solid bullets, and as low as 3.6 grams (55.6 gr) with the use of a sub-caliber bullet in a sabot. Loads are available with reduced velocity and pressure as well as increased velocity and pressure for stronger firearms. The .30-06 remains one of the most popular sporting cartridges in the world. Many hunting loads have over 3,000 foot-pounds (4,100 J) of energy at the muzzle and use expanding bullets that can deliver rapid energy transfer to targets.
|110 gr (7.1 g)||N/A||3,505 ft/s (1,068 m/s)||3,356 ft/s (1,023 m/s)||3,500 ft/s (1,067 m/s)||N/A||3,471 ft/s (1,058 m/s)|
|125–130 gr (8.1–8.4 g)||3,140 ft/s (957.1 m/s)||3,334 ft/s (1,016 m/s)||3,129 ft/s (953.7 m/s)||3,200 ft/s (975.4 m/s)||3,258 ft/s (993.0 m/s)||3,278 ft/s (999.1 m/s)|
|150 gr (9.7 g)||2,910 ft/s (887.0 m/s)||3,068 ft/s (935.1 m/s)||2,847 ft/s (867.8 m/s)||3,100 ft/s (944.9 m/s)||3,000 ft/s (914.4 m/s)||3,031 ft/s (923.8 m/s)|
|165 gr (10.7 g)||2,800 ft/s (853.4 m/s)||2,938 ft/s (895.5 m/s)||2,803 ft/s (854.4 m/s)||3,015 ft/s (919.0 m/s)||3,002 ft/s (915.0 m/s)||2,980 ft/s (908.3 m/s)|
|180 gr (11.7 g)||2,700 ft/s (823.0 m/s)||2,798 ft/s (852.8 m/s)||2,756 ft/s (840.0 m/s)||2,900 ft/s (883.9 m/s)||2,782 ft/s (848.0 m/s)||2,799 ft/s (853.1 m/s)|
|200 gr (13.0 g)||N/A||2,579 ft/s (786.1 m/s)||2,554 ft/s (778.5 m/s)||N/A||2,688 ft/s (819.3 m/s)||2,680 ft/s (816.9 m/s)|
|220 gr (14.3 g)||2,400 ft/s (731.5 m/s)||2,476 ft/s (754.7 m/s)||N/A||2,500 ft/s (762.0 m/s)||2,602 ft/s (793.1 m/s)||2,415 ft/s (736.1 m/s)|
The table above shows typical muzzle velocities available in commercial 30-06 loads along with maximum 30-06 muzzle velocities reported by several reloading manuals for common bullet weights. Hodgdon, Nosler, and Barnes report velocities for 24 inches (610 mm) barrels. Hornady and Speer report velocities for 22 inches (560 mm) barrels. The data are all for barrels with a twist rate of 1 turn in 10 inches (250 mm) which is needed to stabilize the heaviest bullets. The higher muzzle velocities reported by Nosler for 165 grains (10.7 g) and heavier bullets use loads employing a slow-burning, double-base powder (Alliant Reloder 22).
The newer 7.62×51mm NATO/.308 Winchester cartridge offers similar performance to standard military .30-06 loadings in a smaller cartridge. However, the greater cartridge capacity of the .30-06 allows much more powerful loadings if the shooter desires.
.30-06 Springfield Performance articles: 11
One reason that the .30-06 has remained a popular round for so long is that the cartridge is at the upper limit of power that is tolerable to most shooters. Recoil energy (free recoil) greater than 20 foot-pounds force (27 J) will cause most shooters to develop a serious flinch, and the recoil energy of an 8-pound (3.6 kg) rifle firing a 165-grain (10.7 g) 30-06 bullet at 2,900 feet per second (880 m/s) is 20.1 foot-pounds force (27.3 J). Recoil-shy shooters can opt for lighter bullets, such as a 150-grain (9.7 g) bullet. In the same 8-pound (3.6 kg) rifle, a 150-grain (9.7 g) bullet at 2,910 feet per second (890 m/s) will only generate 17.6 foot-pounds force (23.9 J) of recoil energy. Young shooters can start out with even lighter bullets weighing 110, 125 or 130 grains (7.1, 8.1 or 8.4 g).
Overview of "Free recoil" article
The .30-06 Springfield cartridge case can hold 68.2 grains (4.42 g) of water and has a volume of 4.42 millilitres (0.270 in3). The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt-action rifles and machine guns alike, under extreme conditions.
.30-06 Springfield maximum C.I.P. cartridge dimensions. All sizes in millimeters.
Americans defined the shoulder angle at alpha/2 = 17.5 degrees. According to the Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives (C.I.P.) the common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 4 grooves, Ø lands = 7.62 mm (.30 in), Ø grooves = 7.82 mm (.308 in), land width = 4.49 mm (.1768 in) and the primer type is large rifle.
According to the official C.I.P. guidelines, the .30-06 Springfield case can handle up to 405 MPa (58,740 psi) piezo pressure. In C.I.P.-regulated countries, every rifle cartridge combination has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers. The 8×64mm S is the closest European ballistic twin of the .30-06 Springfield.
.30-06 Springfield Cartridge dimensions articles: 7
Military cartridge types
Note: .30-06 cartridges are produced commercially with many different bullets and to a number of different specifications.
The .30-06 round was replaced by the 7.62×51mm NATO round in 1954. However, it remained in limited use in the army reserves and national guard for some time; Frankford Arsenal only stopped production in 1961 and Lake City Army Ammunition Plant was making .30-06 until the late 1970s, with new production batches in 1993 and 2002.
- Armor-piercing, M1917: The M1917 was the first service-issue armor-piercing rifle ammunition used by the US Army. It had a steel core in a lead envelope with a partial cupro-nickel jacket which had an exposed soft tip. The exposed tip was designed to aid in the envelope peeling away on impact to allow the core to strike the target. It had the unintended effect of making the thin lead envelope an expanding bullet. Since expanding bullets were seen as violating the Hague Convention it did not see service in World War I.
- Armor-piercing, M1918: The M1918 was similar to the armor-piercing M1917 round except it had a smooth cannelure near the case-mouth and had a full-metal-jacketed bullet. It replaced the AP M1917 round in service.
- Armor-piercing, M1922 (1922–1934): This was a redesigned armor-piercing round with a heavier steel core. It was the first armor-piercing round to have a black-painted bullet tip.
- Armor-piercing, M1 (1934–1939): This was a higher-velocity (3,180 fps) AP round that was under development throughout its service. It was replaced in 1939 by the AP M2, a redesign of the AP M1922.
- Armor piercing, M2 (1939–1954): This cartridge is used against lightly armored vehicles, protective shelters, and personnel, and can be identified by its black bullet tip. Bullet is flat base, weight 163–168 grains. Defense against the M2 projectile by name is one of the performance standards for Type IV body armor.
- Armor piercing incendiary, T15/M14 (1943–?) and M14A1: This cartridge may be substituted for the M2 armor-piercing round and is normally employed against flammable targets. The tip of the M14 bullet is colored with a blue tip over a black ring. The M14A1 featured an improved core design and incendiary charge. The M14A1 bullet is colored with aluminum paint.
- Ball, M1906 (1906–1925): This cartridge is used against personnel and unarmored targets, and can be identified by its silver-colored bullet. The M1906 has a 9.7 g (150-grain) projectile and flat base. Its jacket is a cupro-nickel alloy which was found to quickly foul the bore.
- Ball, M1 (1925–1937): The M1 has an 11.2 g (173-grain), nine-degree boat-tailed projectile designed for aerodynamic efficiency. Though it had a lower initial velocity, velocity and energy were greater at longer ranges due to its efficient shape. The harder bullet was made of seven parts lead to one part antimony. The jacket material was changed to gilding metal (an alloy of 95% copper and 5% zinc) to reduce fouling.
- Ball, M2 (1937–1954): With a 9.7 g (150-grain) bullet based on the profile of the M1906, this cartridge incorporated the gilding-metal jacket of the M1 projectile combined with a slightly heavier, pure-lead core. It had a higher muzzle velocity than either of the earlier cartridges.
- Ball, M2 alternate (1943–1945): A wartime economy variant of the ball M2 that used a steel full metal jacket coated with gilding metal to conserve copper and tin.
- Blank, M1906: This cartridge is used to simulate rifle fire. It is derived from the M1903 blank, but with a resized neck. It has a paper bullet that contains a tiny black powder charge to aid in breaking it up.
- Blank, M1909: This cartridge is used to simulate rifle fire. The cartridge is identified by having no bullet, having a cannelure in the neck of the case, and the crimp is sealed by red lacquer. This is still a current cartridge for ceremonial M1 Garands. Modern M1909 blanks are rose crimped, but they have the same designation.
- Dummy, M40: This cartridge is used for training. The cartridge has six longitudinal corrugations and there is no primer.
- Explosive, T99: Development of a cartridge that contained a small explosive charge which more effectively marked its impact. Often referred to as an "observation explosive" cartridge, it was meant to designate line-of-sight targets for cannon. The T99 was never adopted.
- Frangible, T44/M22 (April 1945): The bullet disintegrates upon striking a hard or armored target, leaving a pencil-like mark to indicate a hit during bomber aerial gunnery practice. The cartridge is identified by a green bullet tip with a white ring to the rear of the green color.
- Gallery practice M1919: A reduced-charge Ball cartridge with a 140-gr. wax-coated lead round-nosed bullet used for target shooting at indoor facilities or near built-up areas. It was later renamed the Guard M1 in 1933 and was used for guard and sentry duty at defense plants and military installations during World War II.
- Guard M1906 (1907–1918): A reduced-charge ball cartridge with a 150-gr. FMJ pointed-nose bullet used for guard and sentry duty in built-up areas. The cartridge was originally marked with six cannelures in the middle, but this weakened the case and caused it to burst in a dirty rifle. It was later marked by six dents or flutes on the shoulder of the cartridge. Although production stopped in 1918, there were plenty of stocks of the oddball round left until the 1920s.
- High pressure test, M1: The cartridge is used to proof test 30-06 rifles and machine guns after manufacture, test, or repair. The cartridge is identified by stannic-stained (silvered) cartridge case loaded to a pressure of 60,000–70,000 psi (413.7–482.6 MPa).
- Incendiary, M1917: Early incendiary cartridge, bullet had a large cavity in the nose to allow the material to more easily shoot forward on impact. As a result, the M1917 had a tendency to expand on impact. The M1917 had a blackened tip.
- Incendiary, M1918: Variant of the M1917 with a normal bullet profile to comply with international laws regarding open-tipped expanding bullets.
- Incendiary, M1: This cartridge is used against unarmored, flammable targets. The tip of the bullet is painted blue.
- Match, M72: This cartridge is used in marksmanship competition firing, and can be identified by the word MATCH on the head stamp.
- Tracer, M1: Tracer for observing fire, signaling, target designation, and incendiary purposes. The M1 has a red tip.
- Tracer, M2: Tracer for observing fire, signaling, target designation, and incendiary purposes. Has a short burn time. The M2 originally had a white tip, but then switched to a red tip like the M1.
- Tracer, M2 alternate (1943–1945): A wartime economy variant of the tracer M2 that used a steel full metal jacket coated with gilding metal. It was ballistically matched to the ball M2 alternate.
- Tracer, T10/M25: Improved tracer over M1/M2. Designed to be less intense in terms of brightness than either the M1 or M2 tracers. The M25 had an orange tip.
- Blank cartridges, M1 (1933–1945), M2 (1941), M3 (1941–1953), and M3E1 (1953–present): These cartridges are used in training, as well as in conjunction with the M7 series of rifle grenade launchers to propel rifle grenades. Blank cartridges utilize a full-size brass case and carry only a powder charge. M1, M2 and M3 blanks are sealed at the case-mouth with a red wad and the M3E1 is crimped. The differences between the three cartridges have to do with the powder charge and the range of grenade launchers. The M1 was a universal blank and rifle grenade cartridge that replaced the specialized rifle grenade (RG), chemical rifle grenade (CRG), and chemical warfare grenade (CWG) cartridges and was used with cup-discharger rifle grenade launchers. The M2 was an experimental cartridge used as a testbed; it used a propellant mixture of black powder and smokeless powder because it was feared that the smokeless powder would not reliably ignite by itself. The M3 was designed to be used with the M1 series (for the M1903 Springfield rifle), M2 series (for the M1917 Enfield rifle), and M7 series (for the M1 Garand rifle) spigot grenade launchers and used a propellant that was a mixture of five grains of FFFG black powder and 40 grains of IMR-4898 smokeless powder. The M3E1 featured an extended case neck, a rosepetal crimp, and a full smokeless powder loading and was designed for use with the M7A3 spigot rifle grenade launcher and larger ENERGA rifle grenade. The grenade blanks were issued in double-rowed 10-round cartons, usually as part of a set with the M13 metal grenade launcher assortment ammo can.
The .30-06 (or "caliber .30") cartridge was adopted in 1940 during the beginnings of the Lend-Lease program in anticipation of using American weapons in front-line service. The British used American-made ammunition during the war, which was designated as cartridge S.A, .30 to avoid confusing it with their own .303 British service round. It was used after the war as belted machinegun ammunition by the Royal Armored Corps and was not declared obsolete until October, 1993. The "z" after the numeral indicates that it used a nitrocellulose propellant rather than cordite. Marks of ammunition were originally designated with Roman numerals (i.e., .303 Ball Mark VII), but were replaced with Arabic numerals by 1945 (i.e., .303 Ball MK 7).
- Cartridge S.A, .30 ball MK Iz: This was the War Ministry's designation for the 172-grain .30-06 Ball M1 round. It was not accepted for use in service, as the American military had already marked it as limited standard.
- Cartridge S.A, .30 ball MK IIz: This was the War Ministry's designation for the 150-grain .30-06 Ball M2 round. Lend-Lease ammo made for the British government had no mark designation and was headstamped .300z.
- Cartridge S.A, .30 ball MK 3z: This was the designation for an experimental round designed in 1945 for Royal Navy use that was based on the .30-06 ball M2. It was not adopted for service.
- Cartridge S.A, .30 ball MK 4z: This is a boat-tailed cartridge with a 150-grain full metal jacketed bullet. It is marked with a purple annulus. It was normally packed in 20-round cartons. However, Commonwealth countries that used the M1 Garand (like Pakistan) bundled it in 16-round cartons that contained two preloaded 8-round Mannlicher-style en-bloc clips.
- Cartridge S.A, .30 ball MK 5z: This was made under contract by Fabrique Nationale in the 1970s.
- Cartridge S.A, tracer .30 inch G Mark 1z: This is a boat-tailed cartridge with a 150-grain full metal jacketed bullet and a Berdan primer. It is marked with a red annulus and has a headstamp of .30 G1z.
- Cartridge S.A, tracer .30 inch G Mark 2z: This was made under contract by Fabrique Nationale in the 1970s and is paired with .30 ball MK 5z. It is the same as the G Mark 1z, except it has a non-corrosive Berdan primer. It is marked with a red bullet tip and has a headstamp of .30 G2z.
- Cartridge S.A., incendiary .30 inch B Mark Iz: US-made incendiary M1 cartridges.
- Cartridge S.A., incendiary .30 inch B Mark IIz: UK-made incendiary M1 cartridges.
- Cartridge S.A., drill Mark I: This was the War Ministry's designation for the US dummy M40 round. It had green paint on its flutes.
- Cartridge S.A., drill Mark II: US dummy M40 round made by the UK from used US .30-06 cases. It had a recapped headstamp, ball or AP bullet over a wooden dowel, and red paint on its flutes.
- Cartridge S.A., drill Mark III: Training cartridge made by the Indian Army. Although described and specified in a 1945 ammunition manual, no copies have been discovered.
- Cartridge S.A., drill Mark IV:
- Cartridge S.A., drill Mark 5:
The .30-06 round was adopted in 1949 for use in American war surplus military aid weapons like the M1 Garand and M1919 medium machinegun. Military production was from the 1950s to the mid-1960s, while export production to French Union nations lasted until the late 1980s. Cartridge cases were softer than US specifications to prohibit their being recovered and reloaded by insurgents.
- 7.62mm Modele 1949 Cartouche à Balle Ordinaire: This cartridge was based on the USGI .30-06 ball M2 (alternate) round. It had a cupro-nickel- or gilding-metal-clad steel jacket with either a brass or lacquered Parkerized steel case with a Berdan primer.
- 7.62mm Modele 1951 Cartouche à blanc pour Fusil: This blank cartridge has a papier-mâché bullet for training use in rifles. The bullet is painted green to tell it apart from regular ammo.
- 7.62mm Modele 1951 Cartouche à blanc pour Fusil-Mitrailleur: This blank cartridge has a wooden bullet for training use in machineguns. The bullet is painted or tinted blue to tell it apart from regular ammo.
- 7.62mm Modele 1952 Cartouche à blanc: This blank cartridge has a lacquered Parkerized steel case and is sealed by a blue cardboard disc at the case mouth.
.30-06 Springfield Military cartridge types articles: 13
U.S. military firearms using the .30-06 cartridge
- M1903/M1903A3 bolt-action rifle using Mauser-licensed stripper clips
- M1917 Enfield rifle, loading from Mauser-style stripper clips
- Gatling gun: Some U.S. Gatling guns were re-chambered for .30-06
- Model 1909 machine rifle: The Benét–Mercié light machine gun was chambered for .30-06
- M1918 Chauchat: The US used a mix of Chauchats in .30-06 and 8 mm Lebel
- Lewis gun: The US used a limited amount of Lewis guns chambered in .30-06 in both World War I and World War II
- M1917 machine gun water-cooled
- M1919 machine gun, M37 machine gun, and AN/M2 aircraft machine gun. All air cooled machine guns feeding from belts.
- M1918 Browning Automatic Rifle, loading from detachable magazines
- Marlin machine gun: Similar to the Colt–Browning machine gun ('Potato Digger'), but without the swinging 'digger' piston (linear gas-action piston replacing the swinging action), and used mainly on aircraft.
- M1 Garand, loading in a Mannlicher-type en bloc clip
- M1941 Johnson rifle, feeding from a 10-round internal rotary magazine, loading from stripper clips
- M1941 Johnson LMG, feeding from magazine
.30-06 Springfield U.S. military firearms using the .30-06 cartridge articles: 4
- Chart of SAAMI pressure levels for common cartridges, in PSI or CUP
- "Federal Cartridge Co. ballistics page". Archived from the original on 22 September 2007. Retrieved 2007-09-21.
- "Accurate Powder reload data table" (PDF). Archived from the original (PDF) on 20 March 2009. Retrieved 2009-02-09.
- Gun Digest Shooter's Guide to Rifles Wayne van Zwoll, p 186
- Sharpe, Philip B. (1938). The Rifle in America. William Morrow. p. 591.
The rimless cartridge case first used a standard 220-grain Krag bullet, but in 1906 the government decided that high velocity was necessary and accordingly adopted the German form of pointed or spitzer bullet, reducing the weight to 150 grains closely approximating the 154-grain 8 mm Mauser.
- "Cartridge Specifications and Chronology". Retrieved 26 October 2014.
- "The .30-06 Springfield Cartridge". The M1 Garand Rifle. Retrieved 26 October 2014.
- Hatcher, Julian S. (1962). Hatcher's Notebook (3rd ed.). Harrisburg, PA: Stackpole Company. p. 19. LCCN 62-12654.
The maximum range was given in the handbooks as 4700 yards.
- Hatcher 1962, p. 20
- George, John (1981). Shots Fired in Anger. NRA Press. pp. 402–403.
- Hatcher 1962, pp. 21–23
- Hatcher 1962, pp. 19–20
- "FN Mauser Model 98 rifle and carbine operator's manual" (PDF).
- "M118 History - Sniper Central". Retrieved 26 October 2014.
- Firestone, Adam C. "Firearm Technical Trivia, July 1999". www.cruffler.com.
- Hatcher 1962, p. 29
- FM 23-10 Basic Field Manual: U.S. Rifle Caliber .30, M1903, 20 September 1943 page 212 Archived April 18, 2013, at the Wayback Machine
- "Technical Manual Small-Arms Ammunition, TM9-1990, U.S. War Department". 23 May 1942. Retrieved 20 February 2020.
- Mann Accuracy Device
- "Technical Manual Small-Arms Ammunition, TM9-1990, U.S. War Department". 23 May 1942. Retrieved 20 February 2020.
- Paul Wahl and Don Toppel, The Gatling Gun, Arco Publishing, 1971, p. 155.
- Dunlap, Roy, Ordnance Went Up Front, Samworth Press (1948), p. 303 ISBN 978-1-884849-09-1
- U.S. Army (April 1994), Army Ammunition Data Sheets: Small Caliber Ammunition (PDF), Technical Manual, TM 43-0001-27, page 5-9
- George 1981, p. 409
- George 1981, pp. 81, 428, 434–435
- Cooke, Gary W. ".30 Caliber (.30-06 Springfield) Ammunition". inetres.com.
- Armor Plate Shootout - 0.5" thick MIL-A-12560 armor plate. 31 January 2013 – via YouTube.
- "Federal Premium Ammunition - Rifle". www.federalpremium.com. Retrieved 2017-12-18.
- Hodgdon Powder Company, Cartridge Load Recipe Report, 3/27/2010, data.hodgdon.com
- Speer Reloading Manual Number 12, 1994, Blount, Inc., Lewiston, ID. pp. 286-294.
- Hornady Handbook of Cartridge Reloading, Fourth Edition, 1991, Hornady Manufacturing Company, Grand Island, NE. pp. 343-350.
- Nosler Reloading Guide Number Four, 1996, Nosler, Inc., Bend OR. pp. 322-329.
- Barnes Reloading Manual Number 2-Rifle Data, 1997, Barnes Bullets, Inc., American Fork, UT. pp. 381-386.
- Barnes, Frank C., Cartridges of the World (Kindle Edition), 2009, Frank C. Barnes and Krause Publications, Chapter 2, Location 375
- Kim Lockhart. "30-06 Springfield". Archived from the original on 2013-04-24. Retrieved 26 October 2014.
- "Rifle Recoil Table". Retrieved 26 October 2014.
- "C.I.P. TDCC datasheet .30-06 Spring" (PDF).
- "Ballistic Resistance of Body Armor NIJ Standard-0101.06" (PDF). NIJ Standards. United States Department of Justice. July 2008. Retrieved 2008-11-13.
- "Instructional Guidance on the Operation and Maintenance of M1 Garand Rifle Firing the M1909 Blank Cartridge" (PDF). Archived from the original (PDF) on 2012-11-07. Retrieved 2019-02-08..
- Punnett, Chris. "An Introduction to Collecting .30-06 Cartridges". International Ammunition Association, Inc. Retrieved 3 March 2018.
- US T24 Machine gun (MG42) forgottenweapons.com; Retrieved 1 July 2014
- See, e.g. http://cartridgecollectors.org/?page=introduction-to-30-06-cartridges
- "Gary's U.S. Infantry Weapons Reference Guide - .30 Caliber (.30-06 Springfield) Ammunition". Archived from the original on 27 September 2007. Retrieved 2007-09-21.
- "An Introduction to Collecting .30-06". Archived from the original on 19 September 2007. Retrieved 2007-09-21.
- C.I.P. CD-ROM edition 2003
- C.I.P. decisions, texts and tables (free current C.I.P. CD-ROM version download) (ZIP and RAR format)